BL SWIPER® Red Large
BL SWIPER® RED LARGE is recommended for pipe sizes from 12”-48”, depending on available pump capacity. The BL SWIPER® RED LARGE is designed to work with recycling water as well as clean water.
Due to the extreme power of the BL SWIPER® series of nozzles, the exchangeable jets need to be adapted to project at hand. Depending on project there are two different jet setups:
The standard set up of BL Swiper® is used where the water level in pipe is low, meaning there is no water in pipe or just a low level (max 50 % water coverage of the nozzle).
The standard set up is also used when it is a need to reduce risk of blowing toilets. Service lines from residential and commercial are sensitive to rapid air currents and always needs to be considered. By the proper operating technique this can easily be avoided with the BL SWIPER® series of nozzles, without affecting the cleaning power in main line. We are happy to assist with operating instructions.
If you want optimal cleaning efficiency in pipe with low water level and clean the pipe as quick as possible with minimal total water and diesel consumption, use a maximum pressure, pulling back the nozzle, of 900 PSI. Note that BL SWIPER® works effective already at 450 PSI, pressure at nozzle.
The BL SWIPER® comes with a limited 5-year warranty from manufacture defects. Excluding normal wear and tear, the replaceable stainless-steel runner is also not covered under the warranty. For all warranty claims the BL SWIPER® must be returned to NozzTeq® for evaluation.
The high-water level set up is used where the water level in pipe is high. Contact us to learn more.