Skip to content

High Performance Nozzles

HIGH-EFFICIENT CLEANING NOZZLE

The removing and transportation of loose material in pipes, such as sand, gravel, stones, and sludge by using the power from a jetting truck certain items are required: 

The pump size/capacity are directly related to the size of lines you are attempting to clean size to be cleaned.

Efficient, high performing cleaning nozzle that take the power from the jetting truck and convert it into strong water jets. The design of the nozzle must be able to increase the water velocity in the pipe to be able to transport the material.

The correct choice of cleaning nozzle for above task is a high-performing - Tier 3 nozzle. With the proper choice of nozzle, the result in a water and cost-saving operation with low environmental impact will be achieved, this combined with reduction of time spent on the project along with a lowered effect on the infrastructure. When the inner design of these types of cleaning nozzles reduces to almost eliminated the turbulent flows in the nozzle, resulting in longer and stronger water jets.

What needs to be considered when deciding what cleaning nozzle to use?

Choose a cleaning nozzle with fewer rear water jets, at a lower jet angle. Nozzles with higher rear jet angles is not as efficient transporting material in pipe. In addition, a high angled nozzle needs higher pressure to thrust up the pipe and have a stronger tendency to cause a chance to “blow toilets,” not to mention meaning the jetting truck needs to work at higher engine RPM, resulting in higher fuel costs and more wear and tear of the unit and added crew hours on site.

Do not use one or several front jets if not called for.

High-performing cleaning nozzles Tier 3 can keep the thrusting rear jets together stronger and further behind the nozzle. This allow lower rear jet angle, while the jets are still being able to reach out all the way to pipe wall, before turning into mist.

Select a cleaning nozzle which is designed for the pipe size to be cleaned.

Your nozzle supplier should have the necessary skills and knowledge, along with equipment to check your truck/unit to ensure the nozzle is setup correctly to afford you the most optimum cleaning effect. They should always consider the hose line loss. We fully understand that not all jetter units whether truck mounted, or trailer mounted are not the same.

By investing in the right cleaning nozzle for the job, big money will be saved. Less usage of water. Less usage of fuel, due to lower rpm on jetting truck. The investment will also, in a straightforward way decrease your environmental impact.

We at NozzTeq® have several highly efficient traction cleaning nozzles such as BL SWIPER®, JAWS®, C-RAY®, MANTA® and GOBLIN®.

We at NozzTeq® are happy to guide and assist you towards the best solution for your project.

Show more